Yes, trying my hand at one! 2 Vehicles being used are the 15mm Allied VS Axis M8 Greyhound and a MMM LAV-25. The 1st step on the LAV was to remove the wheels
and then take a saw and cut the box that helded the wheels in place. 2nd step was to cut the wheels flush with the body of the greyhound. You will need to cut
the front of the LAV box down to fit inside the Greyhound and also on the rear of said box. You will need to also sand the Greyhound down where you cut the
wheels off.
Step 3, the MMM box will be a bit smaller then the inside of the Greyhound, so you will need to center it when glueing down. when dry, just put the wheels back in and screw the plate back down.
You will now have a vehicles that looks like a Fuch, but have 8 wheels
Step 3, the MMM box will be a bit smaller then the inside of the Greyhound, so you will need to center it when glueing down. when dry, just put the wheels back in and screw the plate back down.
You will now have a vehicles that looks like a Fuch, but have 8 wheels
